Full Flow Fuel Filter SDEC Diesel Generator 50HZ 1500rpm 250KVA
Stable Running
50HZ 1500rpm 200kw 250kVA SDEC Shangchai Engine Diesel Electric
Silent Diesel Generator
| Frequency : 50HZ ; Rotating speed : 1500Rpm |
| Model | Power(KW) | Capacity(KVA) | Rated current(A) | Engine Model | Copy Stamford Type |
| BS-SD63 | 50 | 62.5 | 90.2 | SC4H95D2 | BS224E |
| BS-SD85 | 68 | 85 | 122.7 | SC4H115D2 | BS224G |
| BS-SD120 | 96 | 120 | 173.2 | SC4H160D2 | BS274D |
| BS-SD135 | 108 | 135 | 194.9 | SC4H180D2 | BS274E |
| BS-SD160 | 128 | 160 | 230.9 | SC7H230D2 | BS274F |
| BS-SD180 | 144 | 180 | 259.8 | SC7H250D2 | BS274G |
| BS-SD200 | 160 | 200 | 288.7 | SC8D280D2 | BS274H |
| BS-SD250 | 200 | 250 | 360.9 | SC9D340D2 | BS274K |
| BS-SD313 | 250 | 313 | 451.1 | G128ZLD11 | BS314D |
| BS-SD350 | 280 | 350 | 505.2 | SC12E460D2 | BS314E |
| BS-SD375 | 300 | 375 | 541.3 | SC15G500D2 | BS314FS |
| BS-SD438 | 350 | 438 | 631.5 | 12V135BZLD | BS354C |
| BS-SD500 | 400 | 500 | 721.7 | 12V135BZLD2 | BS354D |
| BS-SD563 | 450 | 563 | 811.9 | 12V135BZLD1 | BS354ES |
| BS-SD625 | 500 | 625 | 902.1 | SC27G830D2 | BS354FS |
| BS-SD750 | 600 | 750 | 1082.6 | SC33W990D2 | BS404B |
| BS-SD800 | 640 | 800 | 1154.7 | 12V138CZLD | BS404C |
| BS-SD900 | 720 | 900 | 1299.1 | 12V138DZLD | BS404D |
More specific parameters to choose.
| Genset Model | BS-SD250 |
| Prime Power (kw/kva) | 200 / 250 | Standby Power(kw/kva) | 220 / 275 |
| Voltage (v) | 400 | Rated Speed (rpm) | 1500 |
| Frequency (Hz) | 50 | Rated Current (A) | 360 |
| Connection: | 3 phase | Power Factor: | 0.8 |
| Engine Model: | SC9D340D2 | Alternator Model: | BS274K |
| Net Weight (kgs)-Silent | 2750 | Dimensions (mm)-Silent | 3400x1300x1800 |
* Engine:SDEC SC9D340D2
* Cooling Fan with fan guard and front guard
* Alternator: Single bearing, IP23, H class
* 24V Charger
* Shock Absorber
* Dry Air Filter. Dual Fuel Filter. Engine Oil Filter , Coolant
Filter.
* MCCB Circuit Breaker
* Standard Control Panel; ATS for optional
* 2x12V Start Battery with connecting cable
* Storage Battery and battery line, Exhaust pipe,Corrugated pipe
for anti-vibration, Cone Tube, Flange, Muffler
* Soundproof Enclosure/Canopy for optional
* Documents
- Factory Inspection, the test items before delivery are mainly as follows:
- Each genset shall be put into commission more than 4 hours totally.
They are tested on idle load, fully load and 10% overload;
- The noise level is tested
- All of the meters on the control panel shall be tested
- The appearance of the genset and all of the label and nameplate
shall be checked
- Warranty
12 months or 1000 running hours from shipment date. If the quality
problem arise during the warranty period, and verified the problem
is caused by our genset-body instead of external or natural
reasons. (Refer to all kinds of natural disaster, shipping,
loading, unloading, wrong-operation, etc), we will supply the
relevant spare parts free of charge for maintenance; after the
warranty period, we can supply the required spare parts for you
under cost prices.
| Engine Parameter: |
| Specifications |
Engine Model Engine Type
Combustion type Cylinder Type Number of cylinders Bore × stroke Displacement Compression ratio Firing order Injection timing Dry weight Dimension (L×W×H) Rotation Fly wheel housing Standby Power | SC9D340D2 In-line,4 strokes, water-cooled , 4 valves, Turbo charged Air-to-air intercooled Direct injection Wet liner 6 114× 144mm 8.82 L 16.5 : 1 1-5-3-6-2-4 8.5°BTDC Approx.840 kg 1578×778×1290 mm SAE NO.2 SAE NO.11.5 250KW |
| Mechanism |
Type Number of valve Valve lashes at cold
| Overhead valve Intake 2, exhaust 2 per cylinder Intake 0.30mm Exhaust 0.55mm |
| Valve Timing |
Intake valve Exhaust valve | Opening Close 29.5°BTDC 42.5°ABDC 69.5°BBDC 34.5°ATDC |
| Fuel Consumption |
Power 25% 50% 75% 100% 110% | L/h(1500r/min) 14.7 27.3 40.8 54.1 59.6 |
| Fuel System |
Injection pump Governor Feed pump Injection nozzle Opening pressure Fuel filter Used fuel
|
Longkou in-line “P” type Electric type Mechanical type Multi hole type 250 kg/cm2 Full flow, cartridge type Diesel fuel oil
|
| Lube System |
Lub. Method Oil pump Oil filter Oil pan capacity
Angularity limit
Lub. Oil
| Fully forced pressure feed type Gear type driven by crankshaft Full flow, cartridge type High level 25 liters Low level 22 liters Front down 25 deg. Front up 35 deg. Side to side 35 deg. Refer to Operation Manual |
| Cooling system |
Cooling method Water capacity (engine only) Lid Min. pressure Water pump Water pump Capacity The maximum temp. of coolant in prime/ Standby power
Thermostat
Cooling fan
|
Fresh water forced circulation 12 liters N/A Centrifugal type driven by belt 200L/min (1500r/min) N/A
Wax–pellet type Opening temp. 82°C Full open temp. 93°C Blower type, plastic 762 mm diameter, 10 blades
|
Engineering Data |
Heat rejection to coolant Air flow Exhaust gas flow Exhaust gas temp. Max. permissible restrictions Intake system Exhaust system Max. permissible altitude
|
20.35kcal/sec(1500r/min) 18.6m3/min (1500r/min) 41m3/min(1500r/min) 600 °C 3 kPa initial 6 kPa final (need charge filter element) 6 kPa max. 2000 m
|
| Alternator Parameter: Basic Information |
The alternators meet the standards of: GB755, BS5000, VDE00530, NEMAMG1-22,IED34-1,CSA22.2 and AS1350 |
| Technical Data: |
Manufacturer: Phases: Bearing numbers: Power Factor: Protection Class: Altitude Condition: Excitation: Insulation class/Temp. rise class: Tel. Influence Factor TIF: Tel. Harmonic Factor THF: Steady State Voltage Regulation: Alternator Capacity: Efficiency: | Copy Stamford BS274K 3 1 0.8 IP23 ≤1000M Brushless, self-excitation H / H <50 <2% ≤±1% 200KW 92.7% |
(1) The silent canopy we use cold-rolled sheet, all positions are
stronger.
(2) Our spraying plastics all go through pre-treatment of pickling
and phosphating,
so that the surface of the painting will not change color even if
placed outside for five years.
(3) Canopy color painted by customer's requirement.
(4) Strict test including 50% load , 75% load , 100% load and 110%
Load .
(5) Forklift mouth in base frame for easy loading and discharging.
(6) Logo made by customer's requirement if order quantity ≥10units
or a full container.
Q : Do you offer OEM service?
A : Yes
Q : What is your payment term?
A : 30% T/T in advance, the rest payment before shipment. Or
irrevocable L/C.
Q : What is your lead time?
A : About 30 days after receiving deposit or original L/C.But if
your order with some special design,
then the delivery time is longer.
Q : What certificates do you have?
A : We have CE, ISO. And we can apply for specific certificate for
different country such as SONCAP
for Nigeria,CIQ for Egypt, SASO for Saudi Arabia, etc
Q : What is your MOQ?
A : Above 1pc
Q : Which port do you often use when export?
A : Fuzhou Port , or as customer request.
